Command Reference Guide
FXS Interface Command Set
test battery
Use the test battery command to provide battery on the 2-wire foreign exchange station (FXS) interface.
This is helpful when troubleshooting wiring problems with the FXS equipment. Use the no form of this
command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Command History
Release 6.1
Command was introduced.
Usage Examples
The following example provides battery on the 2-wire FXS interface:
(config)#interface fxs 2/1
(config-fxs 2/1)#test battery
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1771