ADTRAN AOS Version R10.1.0 Command Reference Manual page 1715

Command Reference Guide Ethernet Interface Command Set
storm-control action shutdown
Use the storm-control action shutdown command to shut down the interface when a storm occurs. Use
the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled; the interface will only filter traffic.
Command History
Release 5.1 Command was introduced.
Functional Notes
Enabling this option shuts down the interface if a multicast, unicast, or broadcast storm occurs.
Usage Examples
The following example shuts down Ethernet interface 0/1 if a storm is detected:
(config)#interface ethernet 0/1
(config-eth 0/1)#storm-control action shutdown
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1715