ADTRAN AOS Version R10.1.0 Command Reference Manual page 1706

Command Reference Guide
spanning-tree cost <value>
Use the spanning-tree cost command to assign a cost to the interface. The cost value is used when
computing the spanning-tree root path. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the cost value is set to 1000 Mbps.
Command History
Release 5.1
Usage Examples
The following example sets the interface to a path cost of 1200:
(config)#interface ethernet 0/3
(config-eth 0/3)#spanning-tree cost 1200
60000CRG0-35E
Specifies a cost value of 1 to 200000000.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1706