ADTRAN AOS Version R10.1.0 Command Reference Manual page 1732

Command Reference Guide
switchport vlan
Use the switchport vlan command to create a Link Layer Discovery Protocol-Media Endpoint Discovery
(LLDP-MED) network policy that specifies a virtual local area network (VLAN) for voice, guest-voice,
softphone, or voice-signalling applications. Use the optional cos and dscp keywords to define class of
service (CoS) and differentiated services code point (DSCP) values associated with the application. Use
the no form of this command to remove an existing network policy. Variations of this command include:
switchport guest-voice vlan <vlan id>
switchport guest-voice vlan <vlan id> [cos <value> | dscp <value> | cos <value> dscp <value>]
switchport softphone vlan <vlan id>
switchport softphone vlan <vlan id> [cos <value> | dscp <value> | cos <value> dscp <value>]
switchport voice vlan <vlan id>
switchport voice vlan <vlan id> [cos <value> | dscp <value> | cos <value> dscp <value>]
switchport voice-signalling vlan <vlan id>
switchport voice-signalling vlan <vlan id> [cos <value> | dscp <value> | cos <value> dscp <value>]
Syntax Description
guest-voice
softphone
voice
voice-signalling
<vlan id>
cos <value>
dscp <value>
Default Values
By default, no LLDP-MED network policies are configured.
If an application and VLAN are specified without the optional CoS or DSCP parameters, then default CoS
and DSCP values are assigned.
Default CoS values are: voice (5); voice-signalling (3); guest-voice (0); softphone (0).
Default DSCP values are: voice (46); voice-signalling (26); guest-voice (0); softphone (0).
60000CRG0-35E
Specifies a guest voice application, which is used to define a policy for
guest users with a limited feature set voice service.
Specifies a softphone application, which is used to define a policy for
softphone applications that operate on devices, such as PCs or laptop
computers.
Specifies a voice application, which is used to define a policy for dedicated
IP phone handsets and other similar devices supporting interactive voice
services.
Specifies a voice signaling application, which is used to define a policy for
the command and control signaling that supports voice and guest voice
applications.
Specifies the voice VLAN ID. Range is 1 to 4094.
Optional. Specifies the CoS value assigned to the application. Range is
0 to 7.
Optional. Specifies the DSCP value assigned to the application. Range is
0 to 63.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1732