ADTRAN AOS Version R10.1.0 Command Reference Manual page 1718

Command Reference Guide Ethernet Interface Command Set
switchport gvrp
Use the switchport gvrp command to enable or disable GARP VLAN Registration Protocol (GVRP) on
an interface. Use the no form of this command to return to the default value.
Syntax Description
No subcommands.
Default Values
By default, GVRP is disabled on all ports.
Command History
Release 8.1 Command was introduced.
Functional Notes
Enabling GVRP on any interface enables GVRP globally.
Usage Examples
The following example enables GVRP on Ethernet interface 0/24:
(config)#interface ethernet 0/24
(config-eth 0/24)#switchport gvrp
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1718