ADTRAN AOS Version R10.1.0 Command Reference Manual page 1769

Command Reference Guide
rx-gain <value>
Use the rx-gain command to define the receive gain characteristics on the foreign exchange station (FXS)
interface. Receive gain determines the amplification of the received signal before transmitting out the FXS
interface. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, this command is set to -3.0 dB.
Command History
Release 6.1
Functional Notes
When increasing this value, the signal being received on this port sounds louder. When decreasing this
value, the signal being received on this port sounds softer.
Usage Examples
The following example defines the receive gain as -6.4 dB:
(config)#interface fxs 2/1
(config-fxs 2/1)#rx-gain -6.4
60000CRG0-35E
Defines the receive gain characteristics for the interface in 0.1 decibel
increments. Range is -12.0 to 6.0 dB.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FXS Interface Command Set
1769