ADTRAN AOS Version R10.1.0 Command Reference Manual page 1757

Command Reference Guide
test tone
Use the test tone command to activate the 1 kHz test tone. Use the no form of this command to deactivate
the test tone. Variations of this command include:
test tone far
test tone near
Syntax Description
far
near
Default Values
By default, this command is disabled.
Command History
Release 7.1
Usage Examples
The following example sends the test tone toward the FXO interface:
(config)#interface fxo 0/1
(config-fxo 0/1)#test tone near
60000CRG0-35E
Sends the test tone out the T1 network interface to the remote end.
Sends the test tone toward the foreign exchange office (FXO) interface.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FXO Interface Command Set
1757