ADTRAN AOS Version R10.1.0 Command Reference Manual page 1725

Command Reference Guide
switchport port-security maximum <value>
Use the switchport port-security maximum command to configure the maximum number of secure
medium access control (MAC) addresses associated with the interface. Use the no form of this command
to return to the default setting.
Syntax Description
<value>
Default Values
The default value for this command is 1.
Command History
Release 8.1
Usage Examples
The following example sets the maximum supported MAC addresses for Ethernet interface 0/1 to 2:
(config)#interface ethernet 0/1
(config-eth 0/1)#switchport port-security maximum 2
60000CRG0-35E
Specifies the maximum number of secure MAC addresses to be associated
with the interface. Range is 1 to 132.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1725