ADTRAN AOS Version R10.1.0 Command Reference Manual page 1758

Command Reference Guide
tx-gain <value>
Use the tx-gain command to define the transmit gain characteristics on the foreign exchange office (FXO)
interface. Transmit gain determines the amplification of the transmitted signal before transmitting from the
FXO interface toward the network. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, transmit gain is set to 0 dB.
Command History
Release 7.1
Functional Notes
When increasing this value, the signal being transmitted to the far end sounds louder. When decreasing
this value, the signal being transmitted to the far end sounds softer.
Usage Examples
The following example defines the transmit gain as -5.4 dB on the FXO interface:
(config)#interface fxo 0/1
(config-fxo 0/1)#tx-gain -5.4
60000CRG0-35E
Defines the transmit gain characteristics in 0.1 decibel increments. Range is
-6.0 to 10.0 dB.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FXO Interface Command Set
1758