Command Reference Guide
switchport port-security aging
Use the switchport port-security aging command to enable and configure secure medium access control
(MAC) address aging on a particular interface. Use the no form of this command to disable this feature.
Variations of this command include:
switchport port-security aging static
switchport port-security aging time <value>
switchport port-security aging type absolute
Syntax Description
static
time <value>
type absolute
Default Values
By default, dynamic and static aging are disabled.
Command History
Release 8.1
Usage Examples
The following example sets the aging time of secure MAC addresses to 10 minutes:
(config)#interface ethernet 0/1
(config-eth 0/1)#switchport port-security aging time 10
60000CRG0-35E
Configures the interface to age static, as well as dynamic entries in the
secure MAC address table.
Enables port security aging for dynamic entries in the secure MAC address
table by configuring a time (in minutes). Disable aging by setting the time
to 0.
Configures the address to be removed after the specified time regardless of
activity.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1721