ADTRAN AOS Version R10.1.0 Command Reference Manual page 1685

Command Reference Guide
lldp receive
Use the lldp receive command to allow Link Layer Discovery Protocol (LLDP) packets to be received on
this interface. Use the no form of this command to prevent LLDP packets from being received on the
interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Command History
Release 8.1
Release A4.01
Usage Examples
The following example configures Ethernet interface 0/1 to receive LLDP packets:
(config)#interface ethernet 0/1
(config-eth 0/1)#lldp receive
60000CRG0-35E
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet Interface.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1685