ADTRAN AOS Version R10.1.0 Command Reference Manual page 1783

Command Reference Guide
test-pattern
Use the test-pattern command to activate the built-in pattern generator and begin sending the specified
test pattern. This pattern generation can be used to verify a data path when used in conjunction with an
active loopback. Use the no form of this command to cease pattern generation. Variations of this command
include:
test-pattern ones
test-pattern zeros
Syntax Description
ones
zeros
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Release 6.1
Usage Examples
The following example activates the pattern generator for a stream of continuous ones:
(config)#interface e1 1/2
(config-e1 1/2)#test-pattern ones
60000CRG0-35E
Generates a test pattern of continuous ones.
Generates a test pattern of continuous zeros.
Command was introduced.
Command was expanded to include the E1 and G.703 interfaces.
Copyright © 2012 ADTRAN, Inc.
G.703 Interface Command Set
1783