ADTRAN AOS Version R10.1.0 Command Reference Manual page 1667

Command Reference Guide Ethernet Interface Command Set
Default Values
By default, DHCPv6 server mode is not enabled on the interface.
Command History
Release R10.1.0 Command was introduced.
Functional Notes
Enabling the interface as a DHCPv6 server using this command places the interface into DHCPv6 server
mode. DHCPv6 modes (server or relay) are mutually exclusive at the interface. Any existing mode will be
removed if a different mode is specified, and a message will be shown indicating the change in DHCPv6
mode.
Usage Examples
The following example enables the interface as a DHCPv6 server, and specifies that the DHCPv6 server
pool POOL1 is associated with the interface:
(config)#interface ethernet 0/1
(config-eth 0/1)#ipv6 address 2001:DB8:1::1/64
(config-eth 0/1)#ipv6 dhcp server POOL1
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1667