ADTRAN AOS Version R10.1.0 Command Reference Manual page 1686

Command Reference Guide
lldp send
Use the lldp send command to configure this interface to transmit Link Layer Discovery Protocol (LLDP)
packets or to control the types of information contained in the LLDP packets transmitted by this interface.
Use the no form of this command to prevent certain information from being transmitted by the interface.
Variations of this command include:
lldp send 802.3-info mac-phy-config
lldp send management-address
lldp send med-info network-policy
lldp send port-description
lldp send system-capabilities
lldp send system-description
lldp send system-name
lldp send-and-receive
Syntax Description
802.3-info mac-phy-config
management-address
med-info network-policy
port-description
system-capabilities
system-description
system-name
and-receive
Default Values
By default, all interfaces that support LLDP except routed Ethernet are configured to transmit and receive
LLDP packets. LLDP is disabled by default on routed Ethernet interfaces.
The 802.3 MAC/PHY status configuration and LLDP-MED network policy time length
values (TLVs) are only supported on switchport interfaces and NetVanta 1524ST Gigabit
Ethernet interfaces.
Command History
Release 8.1
Release 17.2
Release A4.01
60000CRG0-35E
Enables transmission of the capability and settings of the duplex and speed
on this interface.
Enables transmission of management address information on this interface.
Enables transmission of LLDP-Media Endpoint Discovery (LLDP-MED)
network policy information on the interface.
Enables transmission of port description information on this interface.
Enables transmission of this device's system capabilities on this interface.
Enables transmission of this device's system description on this interface.
Enables transmission of this device's system name on this interface.
Configures this interface to both transmit and receive LLDP packets. This is
the default setting.
Command was introduced.
Command was expanded to include the 802.3 and LLDP-MED information.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet Interface.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1686