ADTRAN AOS Version R10.1.0 Command Reference Manual page 1777

Command Reference Guide
tx-gain <value>
Use the tx-gain command to define the transmit gain characteristics (configured in 0.1 dB increments) on
the foreign exchange station (FXS) interface. Transmit gain determines the amplification of the received
signal before transmitting from the FXS interface toward the network. Use the no form of this command to
return to the default value.
Syntax Description
<value>
Default Values
By default, this command is set to -6.0 dB.
Command History
Release 6.1
Functional Notes
When increasing this value, the signal being transmitted to the far end will sound louder. When decreasing
this value, the signal being transmitted to the far end sounds softer.
Usage Examples
The following example defines the transmit gain as -6.4 dB on the FXS interface:
(config)#interface fxs 2/1
(config-fxs 2/1)#tx-gain -6.4
60000CRG0-35E
Defines the transmit gain characteristics for the interface in 0.1 decibel
increments. Range is -12.0 to 6.0 dB.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FXS Interface Command Set
1777