Ip Rip Receive Version - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

ip rip receive version

Use the ip rip receive version command to configure the Routing Information Protocol (RIP) version the
unit accepts in all RIP packets received on the interface. Variations of this command include:
ip rip receive version 1
ip rip receive version 2
Syntax Description
1
2
Default Values
By default, all interfaces implement RIP version 1 (the default value for the version command).
Command History
Release 1.1
Release 5.1
Release A4.01
Functional Notes
Use the ip rip receive version command to specify a RIP version that overrides the version (in the
Router RIP) configuration. Refer to
AOS only accepts one version (either 1 or 2) on a given interface.
Usage Examples
The following example configures the Ethernet interface to accept only RIP version 2 packets:
(config)#interface ethernet 0/1
(config-eth 0/1)#ip rip receive version 2
60000CRG0-35E
Accepts only RIP version 1 packets received on the interface.
Accepts only RIP version 2 packets received on the interface.
Command was introduced.
Command was expanded to include the Ethernet subinterfaces.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet Interface.
version on page 3035
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
for more information.
1651