Table of Contents
Advertisement
Command Reference Guide
port-auth auth-mode
Use the port-auth auth-mode command to configure the authentication mode. Use the no form of this
command to return to the default setting. Variations of this command include:
port-auth auth-mode mac-based
port-auth auth-mode port-based
Syntax Description
mac-based
port-based
Default Values
th
By default,
e authentication mode is port based.
Command History
Release 10.1
Usage Examples
The following example configures the unit for MAC-based authentication mode:
(config)#interface ethernet 0/1
(config-eth 0/1)#port-auth auth-mode mac-based
60000CRG0-35E
Specifies a medium access control (MAC)-based authentication mode.
Each host must authenticate separately.
Specifies a port-based authentication mode. Only a single host can
participate in the authentication process.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1693
Advertisement
Table of Contents
