Table of Contents
Advertisement
Command Reference Guide
Ethernet Interface Command Set
Functional Notes
Individual LLDP information can be enabled or disabled using the various forms of the lldp send
command. For example, use the lldp send-and-receive command to enable transmit and receive of all
LLDP information. Then use the no lldp send port-description command to prevent LLDP from
transmitting port description information.
Usage Examples
The following example configures Ethernet interface 0/1 to transmit LLDP packets containing all enabled
information types:
(config)#interface ethernet 0/1
(config-eth 0/1)#lldp send
The following example configures Ethernet interface 0/1 to transmit and receive LLDP packets containing
all enabled information types:
(config)#interface ethernet 0/1
(config-eth 0/1)#lldp send-and-receive
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1687
Advertisement
Table of Contents
