ADTRAN AOS Version R10.1.0 Command Reference Manual page 1760

Command Reference Guide
battery-mode
Use the battery-mode command to configure the battery that feeds the foreign exchange station (FXS)
loop. Use the no form of this command to return to the default setting. Variations of this command include:
battery-mode auto
battery-mode high
battery-mode low
Syntax Description
auto
high
low
Default Values
By default, the battery mode is set to auto.
Command History
Release A4.01
Usage Examples
The following example configures the battery mode for high:
(config)#interface fxs 2/1
(config-fxs 2/1)#battery-mode high
60000CRG0-35E
Configures the interface to automatically switch between high and low
battery.
Configures the interface to only use the high battery.
Configures the interface to only use the low battery.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FXS Interface Command Set
1760