ADTRAN AOS Version R10.1.0 Command Reference Manual page 1767

Command Reference Guide
ring-frequency <value>
Use the ring-frequency command to change the ring frequency of a single foreign exchange service (FXS)
port from the default system country value. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the command
appropriate FXS port ring frequency for the specified country. Below is a list of the default ring frequencies
(in Hertz) for fully-supported countries:
Australia
Belgium
Canada
ETSI
Ireland
Command History
Release A5.01
Usage Examples
The following example configures the ring frequency for FXS port 2/1 as 25 Hz.
(config)#interface fxs 2/1
(config-fxs 2/1)#ring-frequency 25
60000CRG0-35E
Specifies the FXS port ring frequency. Valid values are 20, 25, and 50 Hz.
voice system-country <name> on page 1444
25 Hz
25 Hz
20 Hz
25 Hz
25 Hz
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
automatically configures the
Mexico
Puerto Rico
United Arab Emirates
United Kingdom
United States
FXS Interface Command Set
25 Hz
20 Hz
25 Hz
25 Hz
20 Hz
1767