Table of Contents
Advertisement
Command Reference Guide
switchport port-security mac-address
Use the switchport port-security mac-address command to add a static secure medium access control
(MAC) address or sticky secure MAC address associated with the interface and to enable sticky address
learning. Use the no form of this command to remove a MAC address associated with this port. Variations
of this command include the following:
switchport port-security mac-address <mac address>
switchport port-security mac-address <mac address> vlan <vlan id>
switchport port-security mac-address sticky
switchport port-security mac-address sticky-volatile
switchport port-security mac-address sticky <mac address>
switchport port-security mac-address sticky <mac address> vlan <vlan id>
Syntax Description
sticky
sticky-volatile
<mac address>
vlan <vlan id>
Default Values
By default, sticky learning is disabled and there are no configured MAC addresses.
Command History
Release 8.1
Release 17.4
Release 17.9
Functional Notes
For more information about port security configuration, refer to the configuration guide Configuring Port
Access Control in AOS, available online at https://supportforums.adtran.com.
60000CRG0-35E
Optional. Enables sticky address learning if no MAC address is specified.
The learned addresses persist across a reboot.
Optional. Enables sticky address learning for the immediate session only.
The learned addresses do not appear in the configuration and do not persist
across a reboot.
Optional. Adds a MAC address associated with this interface. MAC
addresses should be expressed in the following format xx:xx:xx:xx:xx:xx
(for example, 00:A0:C8:00:00:01).
Optional. Associates the MAC address with the specified VLAN. VLAN ID
range is 1 to 4094.
Command was introduced.
Command was expanded to include the sticky-volatile parameter.
Command was expanded to include the vlan parameter.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1723
Advertisement
Table of Contents
