Table of Contents
Advertisement
Command Reference Guide
no shutdown track <name>
Use the no shutdown track command to restore the Gigabit switchport interface when the specified track
passes. For more information about tracks, refer to
Track Command Set on page
Syntax Description
<name>
Default Values
By default, this command is not configured.
Command History
Release 17.5
Usage Examples
The following example enables the interface based on the specified track:
(config)#interface gigabit-switchport 0/1
(config-giga-swx 0/1)#no shutdown track work-hours
60000CRG0-35E
track <name> on page 1372
2977.
Specifies the name of the track to associate with the activation of the
interface.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
and the
Network Monitor
1691
Advertisement
Table of Contents
