Command Reference Guide
test tone
Use the test tone command to activate the 1 kHz test tone. Use the no form of this command to deactivate
the test tone. Variations of this command include:
test tone near
test tone far
Syntax Description
near
far
Default Values
By default, this command is disabled.
Command History
Release 6.1
Usage Examples
The following example sends the test tone toward the FXS interface:
(config)#interface fxs 2/1
(config-fxs 2/1)#test tone near
60000CRG0-35E
Sends the test tone toward the foreign exchange station (FXS) interface.
Sends the test tone out the T1 network interface to the remote end.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FXS Interface Command Set
1776