ADTRAN AOS Version R10.1.0 Command Reference Manual page 1722

Command Reference Guide
switchport port-security expire
Use the switchport port-security expire command to disable an interface after a specified amount of
time. Use the no form of this command to return to the default setting. Variations of this command include:
switchport port-security expire time <value>
switchport port-security expire type absolute
Syntax Description
time <value>
type absolute
Default Values
By default, this command is disabled and set to type absolute.
Command History
Release 8.1
Usage Examples
The following example disables Ethernet interface 0/1 after 10 minutes:
(config)#interface ethernet 0/1
(config-eth 0/1)#switchport port-security expire time 10
60000CRG0-35E
Enables port expiration by configuring a time (in minutes). Disable by
setting time to 0.
Configures the interface to shut down after the specified time regardless of
activity.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1722