ADTRAN AOS Version R10.1.0 Command Reference Manual page 1766

Command Reference Guide
onhook-transmission
Use the onhook-transmission command to configure the on-hook transmission of voice band audio on the
foreign exchange station (FXS) interface. Use the no form of this command to return to the default value.
Variations of this command include:
onhook-transmission always
onhook-transmission auto
Syntax Description
always
auto
Default Values
By default, on-hook transmission is set to always.
Command History
Release A4.01
Usage Examples
The following example sets the on-hook transmission to auto:
(config)#interface fxs 2/1
(config-fxs 2/1)#onhook-transmission auto
60000CRG0-35E
Enables on-hook transmission of voice band audio.
Enables on-hook transmission of voice band audio when it is possible. This
option lowers the power consumption of the unit; however, it should not be
used if voice message waiting indication is enabled on the port.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FXS Interface Command Set
1766