ADTRAN AOS Version R10.1.0 Command Reference Manual page 1740

Command Reference Guide Ethernet Interface Command Set
Usage Examples
The following example describes a VRRP router within virtual router group 1 as the Default Master
Router:
(config)#interface eth 0/1
(config-eth 0/1)#vrrp 1 description Default Master Router
The following example specifies an IP address of 10.0.0.1 for a VRRP router within virtual router group 1:
(config)#interface eth 0/1
(config-eth 0/1)#vrrp 1 ip 10.0.0.1
The following example specifies that the VRRP router within virtual router group 1 preempts the current
master router after a 30 second delay:
(config)#interface eth 0/1
(config-eth 0/1)#vrrp 1 preempt delay minimum 30
The following example specifies the configured priority for the VRRP router within virtual router group 1 is
254:
(config)#interface eth 0/1
(config-eth 0/1)#vrrp 1 priority 254
The following example disables the VRRP router within virtual router group 1:
(config)#interface eth 0/1
(config-eth 0/1)#vrrp 1 shutdown
The following example configures a VRRP router on group 1 to delay 45 seconds before becoming active:
(config)#interface eth 0/1
(config-eth 0/1)#vrrp 1 startup-delay 45
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1740