ADTRAN AOS Version R10.1.0 Command Reference Manual page 1799

Command Reference Guide
encapsulation 802.1q
Use the encapsulation 802.1q command to put the interface into 802.1q virtual local area network
(VLAN) mode.
If you are using 802.1q encapsulation with the MEF Ethernet interface, you must have a
native VLAN MEF Ethernet subinterface configured for the EFM NIM2 to communicate
with the AOS unit. Refer to the Functional Notes of this command for more information.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release A4.01
Functional Notes
To use 802.1q encapsulation with the MEF Ethernet interface, you must have a native VLAN MEF Ethernet
subinterface configured using the command
Usage Examples
The following example configures a MEF Ethernet subinterface for VLAN usage and puts the MEF
Ethernet interface 0/1 in 802.1q mode:
(config)#interface mef-ethernet 0/1.1
(config-mef-ethernet 0/1.1)#vlan-id 1 native
(config-mef-ethernet 0/1.1)#exit
(config)#interface mef-ethernet 0/1
(config-mef-ethernet 0/1)#encapsulation 802.1q
60000CRG0-35E
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
vlan-id <vlan id> on page
Copyright © 2012 ADTRAN, Inc.
MEF Ethernet Interface
1854:
1799