ADTRAN AOS Version R10.1.0 Command Reference Manual page 1792

Command Reference Guide
arp arpa
Use the arp arpa command to set ARPA as the standard Address Resolution Protocol (ARP) on this
interface. Use the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
The default for this command is arpa.
Command History
Release 3.1
Release 5.1
Release A4.01
Usage Examples
The following example enables standard ARP for the MEF Ethernet interface 0/1:
(config)#interface mef-ethernet 0/1
(config-mef-ethernet 0/1)#arp arpa
60000CRG0-35E
Command was introduced.
Command was expanded to include the Ethernet subinterfaces and Gigabit
Ethernet interfaces.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
MEF Ethernet Interface
1792