Table 544. Extended Id Filter Configuration Register Field Descriptions - STMicroelectronics SPC572L series Reference Manual

RM0400
Table 543. Standard ID Filter Configuration register field descriptions(Continued)
Field
16:29 Filter List Standard Start Address
Start address of standard Message ID filter list (32-bit word address, see
FLSSA
30:31 Reserved
44.3.5.2.20 Extended ID Filter Configuration Register (XIDFC)
Settings for 29-bit extended Message ID filtering. The Extended ID Filter Configuration
controls the filter path for standard messages as described in
Address: 0x0088
0 1 2
R 0 0 0
W
Reset 0 0 0
16 17 18
R
W
Reset 0 0 0
1. These are protected write (P) bits which means that write access by the bits is possible only when the bit 1 [CCE] and bit 0
[INIT] of CCCR register are set to "1".

Table 544. Extended ID Filter Configuration register field descriptions

Field
0:8 Reserved
List Size Extended
9:15
0 No extended Message ID filter
1–64 Number of extended Message ID filter elements
LSE
>64 Values greater than 64 are interpreted as 64
16:29 Filter List Extended Start Address
Start address of extended Message ID filter list (32-bit word address, see
FLESA
30:31 Reserved
3 4 5 6
0 0 0 0
0 0 0 0
19 20 21 22
FLESA
0 0 0 0
Figure 491. Extended ID Filter Configuration register
DocID027809 Rev 4
Description
7 8 9 10
0 0
0 0 0 0
23 24 25 26
(1)
0 0 0 0
Description
CAN Subsystem
Figure 514).
Figure 519.
Access: RP
11 12 13 14
1
LSE
0 0 0 0
27 28 29 30
0
0 0 0 0
Figure 514).
1029/2058
15
0
31
0
0
1091