STMicroelectronics SPC572L series Reference Manual page 1525

Table of Contents

Advertisement

RM0400
Table 862. 'Functional' Bidirectional Reset Enable (RGM_FBRE) register
Field
Bidirectional reset enable for core debug reset
20
0 ESR0 is asserted on a core debug reset event if the reset is enabled
BE_CORE
1 ESR0 is not asserted on a core debug reset event
Bidirectional reset enable for JTAG 'functional' reset request
21
0 ESR0 is asserted on a JTAG 'functional' reset request event if the reset is enabled
BE_JTAG_FUNC
1 ESR0 is not asserted on a JTAG 'functional' reset request event
Bidirectional reset enable for Core Watchdog reset
22
0 ESR0 is asserted on a Core Watchdog reset event if the reset is enabled
BE_CWD
1 ESR0 is not asserted on a Core Watchdog reset event
Bidirectional reset enable for System Watchdog reset
23
0 ESR0 is asserted on a System Watchdog reset event if the reset is enabled
BE_SWT
1 ESR0 is not asserted on a System Watchdog reset event
24–27
Reserved
Bidirectional Reset Enable for software 'functional' reset
28
0 ESR0 is asserted on a software 'functional' reset event if the reset is enabled
BE_SOFT_FUNC
1 ESR0 is not asserted on a software 'functional' reset event
29
Reserved
Bidirectional Reset Enable for ESR1 External Reset
30
0 ESR0 is asserted on an ESR1 external reset event if the reset is enabled
BE_ESR1
1 ESR0 is not asserted on an ESR1 external reset event
31
Bidirectional Reset Enable for ESR0 External Reset
BE_ESR0
0 ESR0 is asserted on an ESR0 external reset event if the reset is enabled
51.3.1.9
'Functional' Event Short Sequence (RGM_FESS) register
This register defines which reset sequence is followed when a 'functional' reset sequence is
triggered. The 'functional' reset sequence can either start from PHASE1 or from PHASE3,
skipping PHASE1 and PHASE2. This is useful when a fast reset sequence is desired,
skipping flash reset, for example.
Supervisor and test modes allow for read/write access, whereas read access only is allowed
in user mode. This register is reset only on power-on and any 'destructive' reset.
field descriptions(Continued)
Description
DocID027809 Rev 4
Reset Generation Module (MC_RGM)
1525/2058
1542

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPC572L series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents