ADTRAN AOS Version R10.1.0 Command Reference Manual page 1934

Command Reference Guide
coding b3zs
Use the coding b3zs command to configure the line coding for a T3 physical interface. This setting must
match the line coding supplied on the circuit by the service provider.
Syntax Description
b3zs
Default Values
By default, all T3 interfaces are configured with b3zs line coding.
Command History
Release 6.1
Functional Notes
The line coding configured in the unit must match the line coding of the T3 circuit. A mismatch will result in
line errors (e.g., bipolar violations (BPVs)).
Usage Examples
The following example configures the T1 interface for b3zs line coding:
(config)#interface t3 1/1
(config-t3 1/1)#coding b3zs
60000CRG0-35E
Configures the line coding for bipolar three zero substitution (B3ZS).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
T3 Interface Command Set
1934