ADTRAN AOS Version R10.1.0 Command Reference Manual page 1877

Command Reference Guide
isdn supplementary-service
Use the isdn supplementary-service command to enable integrated services digital network (ISDN)
supplementary services on a primary rate interface (PRI). Use the no form of this command to disable this
feature. Variations of this command include:
isdn supplementary-service ect
isdn supplementary-service rlt
isdn supplementary-service tbct
isdn supplementary-service tbct active-transfers <value>
isdn supplementary-service tbct d-channel-id <id number>
isdn supplementary-service tbct d-channel-id auto
isdn supplementary-service tbct notify-controller
isdn supplementary-service tbct transfer-counters
isdn supplementary-service tbct transfer-rate <value>
Syntax Description
ect
rlt
tbct
active-transfers <value>
d-channel-id <id number>
d-channel-id auto
notify-controller
transfer-counters
transfer-rate <value>
Default Values
By default, ECT, RLT, and TBCT are disabled.
By default, the tbct active-transfers value is set to 100, the tbct d-channel-id is set to auto, the tbct
notify-controller is disabled, the tbct transfer-counters are enabled, and the tbct transfer-rate is set to
10.
Command History
Release A4.01
60000CRG0-35E
Enables European Telecommunications Standards Institute (ETSI)
explicit call transfer (ECT).
Enables Digital Multiplex System (DMS) release link trunk (RLT).
Enables National ISDN II two B-channel transfer (TBCT).
Optional. Sets the number of simultaneous TBCT transfers. Valid range
is 0 to 60000.
Optional. Sets the D-channel ID for TBCT on the interface.
Optional. Sets the D-channel ID for TBCT to be automatically
configured.
Optional. Enables TBCT notification to the controller.
Optional. Enables transfer counters during TBCT.
Optional. Sets the number of transfers allowed within a 10-second
interval. Valid range is 0 to 500.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1877