Command Reference Guide
ignore-error-duration <time>
Use the ignore-error-duration command to specify the amount of time that errors are ignored during line
training. Use the no form of this command to return to the default setting.
Syntax Description
<time>
Default Values
By default, ignore-error-duration is set to 15 seconds.
Command History
Release 15.1
Usage Examples
The following example sets the amount of time errors are ignored during line training to 25 seconds:
(config)#interface shdsl 1/1
(config-shdsl 1/1)#ignore-error-duration 25
60000CRG0-35E
Specifies time in seconds. Valid range is 15 to 30 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
SHDSL Interface Command Set
1900