ADTRAN AOS Version R10.1.0 Command Reference Manual page 1844

Command Reference Guide
mac-address <mac address>
Use the mac-address command to specify the medium access control (MAC) address of the unit. Only the
last three values of the MAC address can be modified. The first three values contain the ADTRAN
reserved number (00:0A:C8) by default. Use the no form of this command to return to the default MAC
address programmed by ADTRAN.
Syntax Description
<mac address>
Default Values
A unique default MAC address is programmed in each unit shipped by ADTRAN.
Command History
Release 1.1
Release 5.1
Release A4.01
Usage Examples
The following example configures a MAC address of 00:0A:C8:5F:00:D2:
(config)#interface mef-ethernet 0/1
(config-mef-ethernet 0/1)#mac-address 00:0A:C8:5F:00:D2
60000CRG0-35E
Specifies a valid 48-bit MAC address. MAC addresses should be expressed
in the following format xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
Command was introduced.
Command was expanded to include the Gigabit Ethernet interfaces.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
MEF Ethernet Interface
1844