ADTRAN AOS Version R10.1.0 Command Reference Manual page 1881

Command Reference Guide
role
Use the role command to configure the interface protocol to use on the primary rate interface (PRI). This
setting controls the functional mode of the interface. Use the no form of this command to return to the
default setting. Variations of this command include:
role network
role network b-channel-restarts disable
role network b-channel-restarts enable
role user
Syntax Description
network
b-channel-restarts disable
b-channel-restarts enable
user
Default Values
By default, the role is set to network b-channel-restarts disable.
Command History
Release 11.1
Usage Examples
The following example configures the interface protocol as user on the PRI:
(config)#interface pri 2
(config-pri 2)#role user
60000CRG0-35E
Sets the port to operate in network termination (NT) mode.
Optional. Disables B-channel restarts.
Optional. Enables B-channel restarts.
Sets the port to operate in terminal equipment (TE) mode.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1881