ADTRAN AOS Version R10.1.0 Command Reference Manual page 1852

Command Reference Guide
subtended-host mode
Use the subtended-host mode command to enable or disable subtended host listening on the Metropolitan
Ethernet Forum (MEF) Ethernet interface. Subtended host provisioning is used when the AOS unit with
the Ethernet in the First Mile (EFM) NIM2 receives provisioning from a Total Access 5000 unit.
Variations of this command include:
subtended-host mode listener
subtended-host mode disabled
Syntax Description
listener
disabled
Default Values
By default, the first configured MEF Ethernet interface has pre-provisioning listening enabled. Any
additional MEF Ethernet interfaces have pre-provisioning listening disabled.
Command History
Release A4.05
Functional Notes
Only one MEF Ethernet interface at a time can have the subtended-host mode set to listener. If all
interfaces have a subtended-host mode of disabled, then all pre-provisioning information is discarded.
Usage Examples
The following example enables the MEF Ethernet interface 0/1 to receive subtended-host provisioning:
(config)#interface mef-ethernet 0/1
(config-mef-ethernet 0/1)#subtended-host mode listener
60000CRG0-35E
Enables the MEF Ethernet interface to receive pre-provisioning information
from the Total Access 5000.
Disables the MEF Ethernet interface from receiving any pre-provisioning
information from the Total Access 5000.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MEF Ethernet Interface
1852