ADTRAN AOS Version R10.1.0 Command Reference Manual page 1866

Command Reference Guide
calling-party
Use the calling-party command to configure and control the primary rate interface (PRI) outgoing caller
ID information. Use the no form of this command to disable this feature. Variations of this command
include:
calling-party name <name>
calling-party number <number>
calling-party override always
calling-party override if-no-CID
calling-party presentation allowed
calling-party presentation not-available
calling-party presentation restricted
Syntax Description
name <name>
number <number>
override always
override if-no-CID
presentation allowed
presentation not-available
presentation restricted
Default Values
By default, the command is disabled.
Command History
Release 11.1
Usage Examples
The following example configures calling party outgoing information:
(config)#interface pri 2
(config-pri 2)#calling-party override always
(config-pri 2)#calling-party presentation 555-8000
(config-pri 2)#calling-party name Company, Inc.
60000CRG0-35E
Configure the calling party name for the PRI.
Configure the calling party number for the PRI.
Enables the calling party to be replaced with the override number.
Enables the calling party to be replaced if caller ID no number is received.
Enables the presentation of caller ID to always be allowed.
Sets the calling party number to not available.
Restricts the delivery on the caller ID information.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1866