Table of Contents
Advertisement
Command Reference Guide
annex
Use the annex command to select the single-pair high-speed digital subscriber line (SHDSL) operating
mode supported on this interface. Use the no form of this command to return to the default setting.
Variations of this command include:
annex a
annex a-or-b
annex b
Syntax Description
a
a-or-b
b
Default Values
By default, the SHDSL operating mode is set to a-or-b.
Command History
Release 15.1
Usage Examples
The following example sets the operating mode to annex a:
(config)#interface shdsl 1/1
(config-shdsl 1/1)#annex a
60000CRG0-35E
Specifies Annex A (North America operating parameters).
Specifies Annex A or B. This feature allows for the detection and then
selection of the annex type during training.
Specifies Annex B (Europe operating parameters).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
SHDSL Interface Command Set
1897
Advertisement
Table of Contents
