ADTRAN AOS Version R10.1.0 Command Reference Manual page 1891

Command Reference Guide
serial-mode
Use the serial-mode command to specify the electrical mode for the interface. Use the no form of this
command to return to the default value. Variations of this command include:
serial-mode eia530
serial-mode v35
serial-mode x21
Syntax Description
eia530
v35
x21
Default Values
By default, the serial interface is configured for a V.35 adapter cable.
Command History
Release 1.1
Functional Notes
The pinouts for each of the available interfaces can be found in the Hardware configuration guide located
on the AOS Documentation CD (provided in shipment).
Usage Examples
The following example configures the serial interface to work with the X.21 adapter cable:
(config)#interface serial 1/1
(config-ser 1/1)#serial-mode x21
60000CRG0-35E
Configures the interface for use with the EIA 530 adapter cable
(P/N 1200883L1).
Configures the interface for use with the V.35 adapter cable
(P/N 1200873L1).
Configures the interface for use with the X.21 adapter cable
(P/N 1200874L1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Serial Interface Command Set
1891