ADTRAN AOS Version R10.1.0 Command Reference Manual page 1915

Command Reference Guide
coding
Use the coding command to configure the line coding for a T1 physical interface. This setting must match
the line coding supplied on the circuit by the service provider. Use the no form of this command to return
to the default setting. Variations of this command include:
coding ami
coding b8zs
Syntax Description
ami
b8zs
Default Values
By default, all T1 interfaces are configured with b8zs line coding.
Command History
Release 1.1
Functional Notes
The line coding configured in the unit must match the line coding of the T1 circuit. A mismatch will result in
line errors (e.g., bipolar violations (BPVs)).
Usage Examples
The following example configures the T1 interface for ami line coding:
(config)#interface t1 1/1
(config-t1 1/1)#coding ami
60000CRG0-35E
Configures the line coding for alternate mark inversion (AMI).
Configures the line coding for bipolar eight zero substitution (B8ZS).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
T1 Interface Command Set
1915