Table of Contents
Advertisement
Command Reference Guide
PRI Interface Command Set
isdn connect enable pi-2
Use the isdn connect enable pi-2 command to enable progress indicator 2 in integrated services digital
network (ISDN) connect messages on the primary rate interface (PRI). Use the no form of this command
to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, progress indicator 2 is disabled.
Command History
Release A4.01
Command was introduced.
Usage Examples
The following example enables progress indicator 2 in the connect message:
(config)#interface pri 2
(config-pri 2)#isdn connect enable pi-2
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1872
Advertisement
Table of Contents
