ADTRAN AOS Version R10.1.0 Command Reference Manual page 1879

Command Reference Guide
isdn switch-type
Use the isdn switch-type command to configure the switch type assigned on the primary rate integrated
services digital network (ISDN) primary rate interface (PRI) circuit. Telephone companies use various
types of ISDN switches and this setting must match the switch type used by your provider. Use the no form
of this command to return to the default setting. Variations of this command include:
isdn switch-type 4ess
isdn switch-type 5ess
isdn switch-type dms100
isdn switch-type etsi
isdn switch-type etsi legacy
isdn switch-type ni2
Syntax Description
4ess
5ess
dms100
etsi
etsi legacy
ni2
Default Values
By default, the command is set to ni2.
Command History
Release 11.1
Release A2
Usage Examples
The following example configures the PRI switch type National ISDN II:
(config)#interface pri 2
(config-pri 2)#isdn switch-type ni2
60000CRG0-35E
Sets the ISDN switch type to ATT 4ESS.
Sets the ISDN switch type to Lucent 5ESS.
Sets the ISDN switch type to Northern ISDN II.
Sets the ISDN switch type to European Telecommunications Standards
(
Institute ETSI) (ETS 300 403).
Sets the ISDN switch type to legacy ETSI (ETS 300 102).
Sets the ISDN switch type to National ISDN II.
Command was introduced.
Command was expanded to include the ETSI switch types.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1879