ADTRAN AOS Version R10.1.0 Command Reference Manual page 1928

Command Reference Guide
system-timing
Use the system-timing command to configure the Rx clock as the primary or secondary timing source for
the system. Use the no form of this command to disable this feature.Variations of this command include:
system-timing primary
system-timing secondary
Syntax Description
primary
secondary
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example configures the T1 interface to provide its Rx clock as the primary timing source for
the system:
(config)#interface t1 1/1
(config-t1 1/1)#system timing primary
60000CRG0-35E
Specifies the Rx clock as the primary timing source.
Specifies the Rx clock as the secondary timing source.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
T1 Interface Command Set
1928