ADTRAN AOS Version R10.1.0 Command Reference Manual page 1875

Command Reference Guide
isdn ringing-signal
Use the isdn ringing-signal command to configure the inband ringback options for inbound integrated
services digital network (ISDN) calls on the primary rate interface (PRI). Use the no form of this command
to return to the default setting. Variations of this command include:
isdn ringing-signal inband
isdn ringing-signal suppress
Syntax Description
inband
suppress
Default Values
By default, the AOS unit provides inband ringback to the calling PBX.
Command History
Release A5.01
Functional Notes
The calling PBX must be able to generate an audible ringing signal in order for the caller to hear ringback
when
isdn ringing-signal suppress is enabled
Usage Examples
The following example configures the AOS unit to suppress the inband ringback:
(config)#interface pri 2
(config-pri 2)#isdn ringing-signal suppress
60000CRG0-35E
Provides inband ringback to the calling private branch exchange (PBX).
Suppresses inband ringback. Instead, the calling PBX generates the
ringback.
Command was introduced.
.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1875