ADTRAN AOS Version R10.1.0 Command Reference Manual page 1820

Command Reference Guide
ip mcast-stub helper-enable
Use the ip mcast-stub helper-enable command to assign the ip mcast-stub helper-address as the
Internet Group Management Protocol (IGMP) proxy. Use the no form of this command to disable this
feature.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Command History
Release 8.1
Release A4.01
Functional Notes
This command is used in IP multicast stub applications in conjunction with the ip mcast-stub
helper-address, ip mcast-stub upstream, and ip mcast-stub downstream commands. When enabled,
the interface becomes a helper forwarding interface. The IGMP host function is dynamically enabled and
the interface becomes the active upstream interface, enabling the unit to perform as an IGMP proxy. Refer
to ip mcast-stub helper-address <ip address> on page
and ip mcast-stub upstream on page 1821
Usage Examples
The following example sets the helper address as the IGMP proxy:
(config)#interface mef-ethernet 0/1
(config-mef-ethernet 0/1)#ip mcast-stub helper-enable
60000CRG0-35E
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
for more information.
Copyright © 2012 ADTRAN, Inc.
1042, ip mcast-stub downstream on page
MEF Ethernet Interface
1818,
1820