Table of Contents
Advertisement
Command Reference Guide
resource pool-member
Use the resource pool-member command to assign the interface to a resource pool, making it a demand
routing resource. Use the no form of this command to return to the default value. Variations of this
command include:
resource pool-member <name>
resource pool-member <name> <cost>
Syntax Description
<name>
<cost>
Default Values
By default, the interface is not assigned to any resource pool.
Command History
Release 11.1
Usage Examples
The following example configures a basic rate interface (BRI) as a member of resource pool MyPool:
(config)#interface modem 1/2
(config-modem 1/2)#resource pool-member MyPool
60000CRG0-35E
Specifies the name of the resource pool to which this interface is assigned.
Optional. Specifies the cost of using this resource interface within the
specified pool. In the event of a tie, a resource with a lower cost will be
selected first. Interfaces with the same cost will be selected in alphabetical
order by interface name.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Modem Interface Command Set
1864
Advertisement
Table of Contents
