ADTRAN AOS Version R10.1.0 Command Reference Manual page 1849

Command Reference Guide
rtp quality-monitoring
Use the rtp quality-monitoring command to enable voice quality monitoring (VQM) of the Realtime
Transport Protocol (RTP) voice stream packets on this interface. If the global command (ip rtp
quality-monitoring) is disabled when this command is issued, the system will return the following
warning: "Applied but not used, you must globally enable ip rtp quality-monitoring to use VQM." Use
the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, VQM is enabled on all wide area network (WAN) and local area network (LAN) interfaces.
Command History
Release 17.1
Release A4.01
Usage Examples
The following example enables RTP quality monitoring on the MEF Ethernet 0/2 interface:
(config)#interface mef-ethernet 0/2
(config-mef-ethernet 0/2)#rtp quality-monitoring
60000CRG0-35E
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
MEF Ethernet Interface
1849