ADTRAN AOS Version R10.1.0 Command Reference Manual page 1868

Command Reference Guide
connect e1<slot/port> tdm-group <number>
Use the connect e1 tdm-group command to configure the time division multiplexing (TDM) group
connection used for the primary rate integrated services digital network (ISDN) primary rate interface
(PRI) interface. Use the no form of this command to return to the default value.
Syntax Description
<slot/port>
<number>
Default Values
By default, the command is disabled.
Command History
Release A2
Usage Examples
The following example configures the unit to connect tdm-group 1 of the E1 to the PRI interface 2:
(config)#interface pri 2
(config-pri 2)#connect e1 0/1 tdm-group 1
60000CRG0-35E
Specifies the E1 interface identifier.
Specifies the TDM group number. Valid range is 1 to 255.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1868