Table of Contents
Advertisement
Command Reference Guide
test-pattern
Use the test-pattern command to activate the built-in pattern generator and begin sending the selected test
pattern toward the network. This pattern generation can be used to verify a data path when used in
conjunction with an active loopback. Use the no form of this command to cease pattern generation.
Variations of this command include:
test-pattern clear
test-pattern errors
test-pattern insert
test-pattern p215
Syntax Description
clear
errors
insert
p215
Default Values
No default values are necessary for this command.
Command History
Release 3.1
Usage Examples
The following example sends a p215 test pattern:
(config)#interface shdsl 1/1
(config-shdsl 1/1)#test-pattern p215
60000CRG0-35E
Clears the test pattern error count.
Displays the test pattern error count.
Inserts an error into the currently active test pattern.
Generates a pseudorandom test pattern sequence based on a 15-bit shift
register.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
SHDSL Interface Command Set
1909
Advertisement
Table of Contents
