ADTRAN AOS Version R10.1.0 Command Reference Manual page 1899

Command Reference Guide
equipment-type
Use the equipment-type command to determine the operating mode for the single-pair high-speed digital
subscriber line (SHDSL) interface. Use the no form of this command to return to the default setting.
Variations of this command include:
equipment-type co
equipment-type cpe
Syntax Description
co
cpe
Default Values
The default for this command is cpe.
Command History
Release 3.1
Usage Examples
The following example changes the operating mode of the SHDSL interface to CO:
(config)#interface shdsl 1/1
(config-shdsl 1/1)#equipment-type co
60000CRG0-35E
Use this option only in a campus environment when operating two SHDSL
network interface modules (NIMs) back-to-back. In this setup, configure the
master NIM to CO and the slave NIM to customer premises equipment
(CPE).
Use this option when interfacing directly with your service provider or when
acting as the slave NIM in a campus environment.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
SHDSL Interface Command Set
1899